Customs, Duty & Incoterms

How Import Duty Is Calculated: Customs Value, Tariff Code and Rate

How Import Duty Is Calculated: Customs Value, Tariff Code and Rate

You want to know how is import duty calculated? Multiply the customs value by the duty rate. This rate is listed for the tariff code and country of origin. An ad valorem (percentage) rate example: a customs value of 12,000 at 3.5% gives 12,000 × 0.035 = 420 in duty. Some goods have a fixed amount per kilogram or per item. A mix of both is also possible. Use the calculator below for duty. Then find the full landed cost for your shipment.

Landed cost and import duty calculator

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

The three inputs that set your duty

  1. Customs value: the amount the duty is charged on.
  2. Tariff classification: the code, based on the Harmonized System (HS), that decides which rate applies.
  3. Origin: where manufacturers made the goods, which decides whether a standard or preferential rate applies.

Some goods also attract additional duties on top of the standard rate, such as anti-dumping duties on certain products from certain origins. The official tariff for your country shows these against the code.

How Import Duty Is Calculated: The three inputs that set your duty

Duty types and formulas

Duty typeFormulaExample inputsDuty
Ad valoremCustoms value × rate12,000 at 3.5%420.00
SpecificQuantity × amount per unit1,500 kg at 0.80 per kg1,200.00
Compound(Value × rate) + (quantity × amount)10,000 at 5% plus 1,500 kg at 0.20 per kg800.00
EU low-value flat duty€3 × distinct item categories3 T-shirts and 1 watch, 2 categories€6.00

All rates in the first three rows are examples to replace with the real rate for your code. The €3 EU figure is the actual rate for low-value consignments from 1 July 2026 to 1 July 2028.

A calculator, used for calculations and formulas

Step 1: find the tariff code

The first six digits of a tariff code are the HS code, shared by the countries that use the Harmonized System. Each country then adds its own digits for national subheadings, and the duty rate sits at that national level. Look the rate up in the official tariff of the importing country:

A fashion designer working on a pattern and using a tablet.
  • United States: the Harmonized Tariff Schedule, published by the US International Trade Commission.
  • United Kingdom: the UK Trade Tariff.
  • European Union: the TARIC database.
  • Canada: the Customs Tariff, via the Canada Border Services Agency.
  • Australia: tariff information from the Australian Border Force.

Classify by what the product is, what it is made of and what it does. Your supplier’s code is a starting point, not an answer, because the export code in one country may differ from the import code in another. The HS codes guide walks through classification.

Step 2: establish the customs value

The customs value usually starts from the price you actually paid for the goods. Countries then differ on what they add: some use a CIF-type value that includes international freight and insurance to the border, while others use an FOB-type value that does not. As a result, the same goods and the same rate can give different duty in different countries. The customs value guide explains the adjustments.

A calculator and a pen on a document.

Step 3: check origin and preferences

Origin is where manufacturers made or substantially transformed the goods, not the country they were shipped from. If a trade agreement covers the goods and they meet its rules of origin, a lower or zero rate may apply, but only if you hold the proof of origin the agreement requires. Claiming a preference without it can lead to customs charging the full duty later.

Worked example 1: ad valorem duty on two bases

You buy goods for 12,000 FOB, with example freight of 900 and example insurance of 45, at an example duty rate of 3.5%.

  1. CIF value: 12,000 + 900 + 45 = 12,945.
  2. Duty on a CIF-type basis: 12,945 × 0.035 = 453.075, rounded to 453.08.
  3. Duty on an FOB-type basis: 12,000 × 0.035 = 420.00.
  4. Difference: 453.08 − 420.00 = 33.08.

The goods and the rate are identical; only the valuation basis changes the result. So, ask your customs broker which basis your country uses.

Worked example 2: specific and compound duty

Example: a 1,500 kg consignment with a customs value of 10,000.

A calculator and a pen on a piece of paper with calculations.
  • Specific duty at an example 0.80 per kg: 1,500 × 0.80 = 1,200.
  • Compound duty at an example 5% plus 0.20 per kg: 10,000 × 0.05 = 500; 1,500 × 0.20 = 300; total 500 + 300 = 800.

Specific duty ignores price. If the value of the same 1,500 kg doubled to 20,000, the specific duty would stay at 1,200, while the compound duty would rise to 20,000 × 0.05 + 300 = 1,000 + 300 = 1,300. Cheap, heavy goods therefore pay proportionally more under a specific duty.

Low-value parcels: when duty may not apply

Low-value thresholds can change whether duty is due at all:

A guinea pig in an Amazon Prime box
  • European Union: since 1 July 2026, a fixed €3 customs duty per distinct item category (tariff sub-heading) applies to low-value consignments under €150. Five T-shirts are one category (€3); three T-shirts and a watch are two (€6). See the EU €3 duty guide.
  • United Kingdom: goods of £135 or less pay no customs duty if they are not excise goods; VAT is collected at the point of sale. See UK import VAT and duty.
  • United States: the de minimis exemption is suspended for all modes, so entries of $800 or less must use formal or informal entry procedures.
  • Canada: courier shipments from the US or Mexico are duty-free up to at least C$150; other origins have a C$20 threshold. See importing into Canada.
  • Australia: for most goods of AUD 1,000 or less, there are no duties, taxes or charges at the border.

Duty is only one import cost

Import VAT or GST, broker fees, destination charges and inland delivery come on top of duty. To see the full cost per unit, run the numbers through a landed cost calculation, which also shows whether duty or freight is the bigger lever for your product.

Common mistakes

  • Copying the supplier’s code without checking it against the importing country’s tariff.
  • Using the country the goods were shipped from as the origin.
  • Claiming a preferential rate without the required proof of origin.
  • Applying the rate to the wrong value, such as the FOB price in a CIF-basis country.
  • Ignoring additional duties listed against the code.

FAQ

How is import duty calculated?

For an ad valorem rate, multiply the customs value by the duty rate for the goods’ tariff code and origin. However, some goods use a fixed amount per unit, or a compound of both.

Is import duty charged on shipping costs?

In countries that use a CIF-type customs value, international freight and insurance to the border are part of the value and attract duty. However, in FOB-basis countries, they do not, influencing how is import duty calculated.

Where do I find the duty rate for my product?

You can find this in the official tariff of the importing country: the US Harmonized Tariff Schedule, the UK Trade Tariff, the EU’s TARIC, Canada’s Customs Tariff or the Australian Border Force’s tariff information.

What is the difference between ad valorem and specific duty?

Ad valorem duty is a percentage of the customs value. Specific duty is a fixed amount per unit of quantity, such as per kilogram or per item; compound duty combines the two.

Do low-value parcels pay import duty?

It depends on the country. For example, the UK charges no customs duty on non-excise goods of £135 or less. The EU charges €3 per item category on low-value parcels since 1 July 2026, and the US de minimis exemption is suspended.

  • Importing into Australia: Duty, GST and the A$1,000 Threshold
  • US De Minimis ($800) Suspended: What Importers Need to Know in 2026
  • Cargo Insurance: ICC A vs C Cover and How Much to Insure
  • Importing from China: A Step-by-Step Shipping Checklist

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in Customs, Duty & Incoterms

Customs, Duty & Incoterms →

Leave a Reply

Your email address will not be published. Required fields are marked *