FedEx dimensional weight is the package’s length × width × height in inches, with each side rounded to the nearest whole inch, divided by 139. FedEx uses that divisor for U.S., Puerto Rico and international shipments. In metric markets, the most common divisor is 5,000 cm³/kg. The bill is based on whichever is greater, actual weight or dimensional weight. For example, a 24.4 × 16.7 × 12.2 in box weighing 18 lb has a dimensional weight of 35.22 lb (24 × 17 × 12 = 4,896 in³ ÷ 139), almost double its scale weight. Use the calculator below to check your own boxes.
Dimensional weight calculator (FedEx, UPS, USPS, DHL and more)
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
The FedEx dimensional weight formula
FedEx publishes the rule in two forms:

- Imperial: L × W × H (inches) ÷ 139 = dimensional weight in pounds
- Metric: L × W × H (centimeters) ÷ 5,000 = dimensional weight in kilograms
FedEx describes 5,000 as “the most common divisor” for metric calculations, with 139 as the imperial equivalent. Also, FedEx Canada lists both 139 in³/lb and 5,000 cm³/kg for shipments within Canada and international shipments.
The two are close: 139 in³/lb is about 5,022 cm³/kg. Whichever unit you measure in, you should land within a fraction of a percent of the same answer before rounding.
Rounding: nearest whole inch
FedEx’s instruction is to “round each measurement to the nearest whole inch” before multiplying. That means:

- 16.3 in counts as 16 in
- 16.7 in counts as 17 in
- 12.2 in counts as 12 in
This is different from USPS, which rounds each side up, so 16.3 in would be 17 in there. On larger boxes, the difference matters. The comparison is laid out in the dimensional weight calculator guide.
The sources used here cover how FedEx rounds dimensions, not how a fractional pound is shown on the invoice. However, check your FedEx rate guide or a recent invoice for that detail.
Worked example 1: a light, bulky carton
Say you ship a carton of cushions measuring 24.4 × 16.7 × 12.2 in, weighing 18 lb.

- Round each side: 24.4 → 24, 16.7 → 17, 12.2 → 12
- Multiply: 24 × 17 × 12 = 4,896 in³
- Divide: 4,896 ÷ 139 = 35.22 lb
- Compare: 35.22 lb is greater than 18 lb, so FedEx bills on dimensional weight
You are paying for roughly 35.22 − 18 = 17.22 lb of “air”. To get the dimensional weight down to the actual weight, the box volume would need to be 18 × 139 = 2,502 in³ or less, about half the current size.
Worked example 2: measuring in centimeters
Now a shipper in Germany sends a carton measuring 60 × 40 × 35 cm, weighing 14 kg, with a divisor of 5,000.
- Multiply: 60 × 40 × 35 = 84,000 cm³
- Divide: 84,000 ÷ 5,000 = 16.8 kg
- Compare: 16.8 kg is greater than 14 kg, so dimensional weight applies
In imperial terms, 16.8 kg × 2.20462 = 37.04 lb. Even a carton that feels heavy can be billed on its size if it is large enough.
How box size changes the FedEx bill
Small cuts in carton size have a direct effect. The table below keeps the 18 lb cushions from example 1 and changes only the box.

| Box (in, rounded) | Volume (in³) | Dimensional weight (lb) | Actual (lb) | Billed on |
|---|---|---|---|---|
| 24 × 17 × 12 | 4,896 | 35.22 | 18 | Dimensional |
| 24 × 17 × 10 | 4,080 | 29.35 | 18 | Dimensional |
| 22 × 16 × 10 | 3,520 | 25.32 | 18 | Dimensional |
| 20 × 16 × 10 | 3,200 | 23.02 | 18 | Dimensional |
Working for each row: 4,080 ÷ 139 = 29.35; 3,520 ÷ 139 = 25.32; 3,200 ÷ 139 = 23.02. Dropping from the first box to the last cuts the billable weight by 35.22 − 23.02 = 12.20 lb, which is about 35% (12.20 ÷ 35.22 = 0.346). All four boxes are still billed on dimensions, because the cushions are light for their size. Compressing or vacuum-packing soft goods would be the next step.
Practical tips for FedEx shippers
- Watch the half-inch. A measurement of 12.4 in rounds down to 12; 12.6 in rounds up to 13. If your carton sits just above the halfway mark, a slightly smaller box can remove a full inch from the calculation.
- Measure the packed box. Bulging sides add length. Tape the box flat and measure at the widest point. See how to measure cartons and pallets.
- Use one unit consistently. If your packing data is in centimeters, run the metric formula with 5,000 rather than converting to inches and rounding.
- Right-size the packaging. A range of three or four standard box sizes often fits most orders better than one large box. The guide to right-sizing e-commerce packaging covers this.
- Check heavier, palletized freight separately. Once a shipment moves to air cargo or LTL, different rules apply; see air freight chargeable weight and the freight class calculator.
FedEx compared with other carriers
FedEx, UPS Daily Rates and USPS (since 12 July 2026) all use 139, while UPS Retail Rates use 166 and DHL Express uses 5,000 cm³/kg. For the same 24 × 17 × 12 in box, UPS Daily Rates would also give 35.22 lb, increased to 36 lb under UPS’s rule to round any fraction up to the next pound. The details are in UPS dimensional weight.

FAQ
What divisor does FedEx use for dimensional weight?
FedEx divides by 139 for U.S., Puerto Rico and international shipments measured in inches. In metric markets, however, the most common divisor is 5,000 cm³/kg.
Does FedEx round dimensions up or to the nearest inch?
FedEx rounds each measurement to the nearest whole inch. So 10.4 in counts as 10 in and 10.6 in counts as 11 in.
Does FedEx always charge dimensional weight?
No. FedEx compares the dimensional weight with the actual weight and bills the greater of the two. Dense items such as books or metal parts are usually billed on actual weight.
Is FedEx’s 5,000 divisor the same as 139?
They are close equivalents. 139 in³/lb converts to about 5,022 cm³/kg, so results differ by well under 1%.
How can a shipper lower FedEx dimensional weight?
Use the smallest box that protects the item, cut empty space and avoid bulging cartons. Each inch removed from one side reduces the volume by the product of the other two sides, for example 24 × 17 = 408 in³ for an inch off the 12 in side of a 24 × 17 × 12 in box.
Related guides
- USPS Dimensional Weight in 2026: The Switch from 166 to 139
- How to Reduce Dimensional Weight Charges on Parcels
- DHL Express Volumetric Weight (5000 Divisor) Explained
- Canada Post Volumetric Weight: 5,000 vs 6,000 Explained
Sources and further reading
- FedEx: What Is Dimensional Weight?: divide by 139, round each side to the nearest inch.
- FedEx: Dimensional Weight (metric): the 5,000 cm³/kg divisor.
