To compare air vs sea freight, convert the same shipment into each mode’s billing unit, then apply your own quoted rates. Air cargo bills chargeable kilograms and counts each cubic meter as at least 166.67 kg; LCL sea freight bills revenue tons and counts each cubic meter as 1,000 kg. For a 2.4 m³, 360 kg shipment that means 400 chargeable kg by air against 2.4 revenue tons by sea. Use the calculator below for the air side, then work through the sea side with the steps that follow.
Air freight chargeable weight calculator
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
Two different billing systems
The modes do not just have different rates. They measure your cargo differently.

Air cargo uses a volumetric divisor of 6,000 cm³/kg (the ratio DHL Global Forwarding publishes, and which Maersk describes as the IATA industry standard):
- Air chargeable weight = greater of actual kg and (L × W × H cm ÷ 6,000)
LCL sea freight (less than container load) uses weight or measure, usually written W/M:
- Revenue tons = greater of total m³ and total metric tonnes, so 1 m³ is treated as equal to 1,000 kg
SEKO notes that LCL is typically subject to a 1 CBM minimum, and iContainers points out that minimums vary by carrier and lane. Full containers (FCL) are priced per container instead. The details are in how LCL sea freight is calculated.
| Billing factor | Air cargo | LCL sea freight |
|---|---|---|
| kg counted per m³ | 166.67 | 1,000 |
| lb counted per ft³ | 10.4 | 62.43 |
| Billing unit | Chargeable kg | Revenue ton (W/M) |
| Typical minimum | Set per carrier | 1 W/M |
The practical meaning: sea freight carries up to a tonne per cubic meter “for free” before weight starts to count, while air starts counting weight at one-sixth of that.
Example 1: light consumer goods
Say you have 30 cartons of homeware, each 50 × 40 × 40 cm (19.7 × 15.7 × 15.7 in) and 12 kg.

Volume and weight:
- 0.50 × 0.40 × 0.40 = 0.08 m³ per carton, × 30 = 2.4 m³
- 30 × 12 = 360 kg actual
Air:
- 50 × 40 × 40 = 80,000 cm³ ÷ 6,000 = 13.33 kg per carton
- 30 × 13.33 = 400 kg volumetric (exactly 2,400,000 ÷ 6,000 = 400)
- Chargeable weight: 400 kg, since 400 is greater than 360
Sea LCL:
- Greater of 2.4 m³ and 0.36 t = 2.4 revenue tons
At an example air rate of 4.50 per kg and an example sea rate of 70 per revenue ton (replace both with your own quotes):
- Air: 400 × 4.50 = 1,800
- Sea: 2.4 × 70 = 168
- Air costs 1,800 ÷ 168 = 10.7 times as much on the main freight line
Example 2: dense machine parts
Now two pallets of machine parts, each 120 × 100 × 100 cm (47.2 × 39.4 × 39.4 in) and 600 kg.
- Volume: 1.20 × 1.00 × 1.00 = 1.2 m³ per pallet, × 2 = 2.4 m³
- Actual weight: 2 × 600 = 1,200 kg
- Air volumetric: 1,200,000 cm³ ÷ 6,000 = 200 kg per pallet, × 2 = 400 kg
- Air chargeable: 1,200 kg (actual is higher)
- Sea: greater of 2.4 m³ and 1.2 t = 2.4 revenue tons
With the same example rates:
- Air: 1,200 × 4.50 = 5,400
- Sea: 2.4 × 70 = 168
- Air costs 5,400 ÷ 168 = 32.1 times as much
What the two examples show
| Measure | Example 1 (homeware) | Example 2 (machine parts) |
|---|---|---|
| Volume (m³) | 2.4 | 2.4 |
| Actual weight (kg) | 360 | 1,200 |
| Air chargeable (kg) | 400 | 1,200 |
| Sea revenue tons | 2.4 | 2.4 |
| Air freight at example 4.50/kg | 1,800 | 5,400 |
| Sea freight at example 70/RT | 168 | 168 |
Two lessons come out of this:

- Light cargo pays air rates on empty space. Per kilogram of goods, the homeware costs 1,800 ÷ 360 = 5.00 by air, against 4.50 for the machine parts. By sea the same figures are 168 ÷ 360 = 0.47 and 168 ÷ 1,200 = 0.14.
- Sea freight ignores weight up to 1,000 kg per m³. Both shipments cost the same by sea because both bill on volume. By air, the dense one costs three times as much. Between 166.67 and 1,000 kg/m³, the gap between modes widens with every extra kilogram. See air cargo density for the break-even logic.
Transit time and inventory cost
Air is much faster than sea, and that speed has a value you can estimate. Ask your forwarder for door-to-door transit times on your lane, then work out the cost of the extra days your stock spends on the water:

- Carrying cost of extra transit = goods value × annual carrying cost rate × extra days ÷ 365
Example: goods worth 40,000, an annual carrying cost rate of 20% (an example figure; use your own finance number), and 30 extra days by sea (also an example):
- 40,000 × 0.20 × 30 ÷ 365 = 657.53
In Example 1, the freight saving by sea is 1,800 − 168 = 1,632, which is larger than 657.53, so sea still wins on cost unless running out of stock would lose sales worth more than the difference. For marketplace sellers, a stockout can be the deciding factor, which is one reason to split an order: a small urgent quantity by air and the bulk by sea. Shipping to Amazon FBA from China covers that split in more detail.
Also remember duty. In countries that value imports on a CIF basis, the freight cost is part of the customs value, so expensive air freight also raises the duty and import VAT base. The landed cost calculator guide shows how to include this.
How to run a fair comparison
- Use one packing list with gross weights and outside dimensions for every carton or pallet.
- Calculate both billing units: air chargeable kg and sea revenue tons.
- Get door-to-door quotes for both. A port-to-port sea rate against a door-to-door air rate is not a fair test. Origin and destination charges apply to both modes. How to read a freight quote explains the line items.
- Check minimums. A 0.3 m³ shipment by LCL still pays the typical 1 W/M minimum, while by air it bills 0.3 × 166.67 = 50 kg. Very small shipments narrow the gap.
- Add inventory cost and duty effects, then decide.
Common mistakes
- Comparing rates instead of totals. A per-kg air rate and a per-revenue-ton sea rate cannot be compared until you apply them to your own shipment.
- Using the courier divisor. Airline cargo normally uses 6,000; express couriers often use 5,000.
- Forgetting the sea minimum on small LCL shipments.
- Leaving out fixed charges such as customs clearance and delivery, which weigh more heavily on small shipments. The guide to how freight cost is calculated lists them by mode.
FAQ
Is air freight always more expensive than sea freight?
On the main freight line it almost always is, because air counts far more weight per cubic meter at a higher rate. Very small or urgent shipments, where minimums and stockout costs dominate, are where air can make overall sense.
Why does sea freight use 1,000 kg per m³?
LCL is billed on weight or measure, where 1 m³ and 1 metric tonne are treated as equal. You pay for whichever is greater.
What density is most efficient by air?
Around 166.67 kg/m³. At that density the volumetric and actual weights are equal, so you pay for no empty space, yet you are not paying for extra weight either.
Should I include customs and delivery when comparing?
Yes. Compare door-to-door totals, including origin and destination charges, duty effects and the cost of transit time.
Can I split one order between air and sea?
Yes. Ship the quantity needed urgently by air and the rest by sea, calculating each part separately with its own billing unit.
Related guides
- Air Freight Chargeable Weight Calculator: How to Calculate It
- Rail Freight Chargeable Weight (1:3000) and How Rail Compares
- Express Courier vs Air Cargo: Which Is Cheaper for Your Shipment?
- Volumetric Weight Calculator: Air, Courier and Parcel Divisors
Sources and further reading
- DHL Global Forwarding: Calculating Chargeable Weight: air 1:6,000, sea 1:1,000 and rail 1:3,000 ratios.
- SEKO Logistics: LCL Shipping: 1 CBM = 1,000 kg revenue ton.
- Maersk: Air Cargo Chargeable Weight: the 6,000 divisor set by IATA.
