Air Freight & Courier

Australia Post Cubic Weight Explained (250 kg per m³)

Australia Post Cubic Weight Explained (250 kg per m³)

Australia Post cubic weight is the parcel’s length × width × height in meters multiplied by 250, and Australia Post charges on the actual weight or the cubic weight, whichever is greater. A 40 × 30 × 20 cm parcel is 0.4 × 0.3 × 0.2 = 0.024 m³, so its cubic weight is 6 kg (0.024 × 250), even if the contents weigh 2.5 kg. For non-contract and MyPost Business senders, Australia Post generally does not apply cubic charging to parcels under 1 kg actual weight, and flat-rate satchels are exempt. Use the calculator below to check your parcels.

Dimensional weight calculator (FedEx, UPS, USPS, DHL and more)

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

The cubic weight formula

Australia Post’s formula is:

Australia Post Cubic Weight Explained: Two wrapped gift boxes of different sizes with ribbons.

Cubic weight (kg) = length (m) × width (m) × height (m) × 250

The 250 is a density: Australia Post treats one cubic meter of parcels as weighing at least 250 kg. To use centimeters, divide each side by 100 first, or multiply the three sides in centimeters and divide by 4,000. Both give the same answer, because 1,000,000 cm³ ÷ 250 kg = 4,000 cm³ per kg.

That makes Australia Post’s factor heavier than many international couriers:

RuleDensity (kg per m³)Equivalent divisor (cm³/kg)40 × 30 × 20 cm parcel (kg)
Australia Post cubic weight2504,0006.0
Courier 5,000 divisor (e.g. DHL Express)2005,0004.8
Air cargo 1:6,000166.676,0004.0

Working for the last column: 24,000 cm³ ÷ 4,000 = 6.0; 24,000 ÷ 5,000 = 4.8; 24,000 ÷ 6,000 = 4.0. The same carton therefore attracts a higher volumetric figure with Australia Post than under a 5,000 divisor. For how the other divisors work, see volumetric weight explained.

When cubic weight applies

Australia Post’s stated rules:

A blue and white toy truck with "Edeka" logo on the side.
  • Greater of the two: parcels are charged on “actual weight or cubed weight equivalent, whichever is greater”.
  • Under 1 kg: for non-contract and MyPost Business customers, Australia Post “will generally not apply cubic charging to parcels weighing less than 1kg actual weight”.
  • Satchels: flat-rate satchels are exempt from cubic charging.

Contract customers may have different terms, so check your agreement. The word “generally” in the under-1 kg rule also means it is worth confirming for unusual parcels.

Worked example 1: a light homewares parcel

Say you send a ceramic vase in a 40 × 30 × 20 cm box, weighing 2.5 kg packed.

  1. Convert to meters: 0.40 × 0.30 × 0.20
  2. Multiply: 0.4 × 0.3 × 0.2 = 0.024 m³
  3. Cubic weight: 0.024 × 250 = 6 kg
  4. Compare: 6 kg is greater than 2.5 kg actual

Billable weight: 6 kg. Because the parcel is over 1 kg actual, the under-1 kg concession does not apply.

Worked example 2: the 1 kg line

Take a 30 × 25 × 15 cm box of knitwear.

A bathroom scale with the needle pointing to 70.
  1. Volume: 0.30 × 0.25 × 0.15 = 0.01125 m³
  2. Cubic weight: 0.01125 × 250 = 2.8125 kg, about 2.81 kg

If the parcel weighs 0.8 kg and you are a non-contract or MyPost Business sender, Australia Post generally does not apply cubic charging, so it is charged at 0.8 kg actual.

If the same box weighs 1.2 kg, the concession no longer applies. The cubic weight of 2.81 kg is greater than 1.2 kg, so 2.81 kg counts. Adding 0.4 kg to the contents more than triples the billable weight (2.81 ÷ 0.8 = 3.5). Keeping light goods under 1 kg actual, or moving them into a satchel, can matter more than box size.

Cubic weight by box size

Box (cm)Volume (m³)Cubic weight (kg)Same box at 5,000 (kg)
20 × 15 × 100.0030.750.60
30 × 25 × 150.011252.812.25
40 × 30 × 200.0246.004.80
50 × 40 × 300.06015.0012.00
60 × 40 × 400.09624.0019.20

Each cubic-weight figure is volume × 250; each 5,000 figure is volume in cm³ ÷ 5,000 (for example 96,000 ÷ 5,000 = 19.2). For a carrier that uses 5,000, such as DHL, see DHL Express volumetric weight.

Worked example 3: a carton sized in inches

Overseas suppliers often quote carton sizes in inches. Say a carton of phone accessories arrives labeled 16 × 12 × 8 in and weighs 3 kg (3 × 2.20462 = 6.61 lb). You want to send it on by Australia Post.

A white box of donuts, with one donut outside the box.
  1. Convert to centimeters (× 2.54): 16 → 40.64 cm; 12 → 30.48 cm; 8 → 20.32 cm
  2. Convert to meters (÷ 100): 0.4064 × 0.3048 × 0.2032
  3. Multiply: 0.4064 × 0.3048 × 0.2032 = 0.02517 m³
  4. Cubic weight: 0.02517 × 250 = 6.29 kg
  5. Compare: 6.29 kg is greater than 3 kg actual

Billable weight: 6.29 kg. As a cross-check, 16 × 12 × 8 = 1,536 in³, and 1,536 ÷ 61,023.7 = 0.02517 m³, the same volume. The CBM from inches guide explains this conversion in more detail.

Checklist before you lodge a parcel

Run through these steps for each new box size:

A light blue gift box with white polka dots and a blue ribbon.
  1. Pack and seal the parcel first, then measure the outside at the widest points in centimeters.
  2. Convert to meters (÷ 100) and multiply the three sides, or multiply in centimeters and divide by 4,000.
  3. Multiply the volume in m³ by 250 to get cubic weight.
  4. Weigh the packed parcel and note whether it is under 1 kg actual. If you are a non-contract or MyPost Business sender, cubic charging generally does not apply below that.
  5. Ask whether a flat-rate satchel would work. Satchels are exempt from cubic charging.
  6. Take the greater of cubic and actual weight as the billable weight.
  7. Check the density. Divide actual weight by volume. Below 250 kg per m³, cubic weight sets the charge and a smaller box saves money. Above it, actual weight is charged, so a smaller box does not lower the billable weight.
  8. Contract customers: confirm the cubic rules in your own agreement.

Tips for Australian senders

  • Measure the outside of the packed parcel at its widest points. See how to measure cartons and pallets.
  • Use satchels for soft goods. Flat-rate satchels are exempt from cubic charging, which suits clothing and textiles.
  • Watch the 1 kg threshold if you are a non-contract or MyPost Business sender.
  • Cut empty space. Every centimeter removed from one side of a 50 × 40 × 30 cm box saves 0.4 × 0.3 × 0.01 × 250 = 0.3 kg of cubic weight if the cut is on the 50 cm side. The guide to right-sizing e-commerce packaging has more ideas.
  • For larger consignments, palletized road or sea freight may be better value; compare with the freight cost calculation guide. Importers can check Australian import duty and GST too.

FAQ

How does Australia Post calculate cubic weight?

Multiply length × width × height in meters, then multiply by 250. The parcel is charged on the greater of that figure and its actual weight.

Does Australia Post apply cubic weight to parcels under 1 kg?

For non-contract and MyPost Business customers, Australia Post says it will generally not apply cubic charging to parcels weighing less than 1 kg actual weight.

Are satchels charged on cubic weight?

No. Australia Post’s flat-rate satchels are exempt from cubic charging.

What divisor is Australia Post’s 250 kg per m³ equivalent to?

It equals a divisor of 4,000 cm³/kg. Multiply the sides in centimeters and divide by 4,000 to get the same result.

Is Australia Post cubic weight higher than DHL’s volumetric weight?

For the same box, yes. Australia Post uses 250 kg per m³, while a 5,000 divisor equals 200 kg per m³, so the Australia Post figure is 25% higher.

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in Air Freight & Courier

Air Freight & Courier →

Leave a Reply

Your email address will not be published. Required fields are marked *