Air Freight & Courier

Air Cargo Density: When You Pay for Weight vs Volume (1:6000)

Air Cargo Density: When You Pay for Weight vs Volume (1:6000)

Air cargo density is the actual weight of a shipment divided by its volume, and it tells you whether the airline will bill you on weight or on space. Under the standard 1:6000 volumetric ratio, the break-even is 166.67 kg per m³ (about 10.4 lb/ft³): cargo denser than that pays for its actual weight, while lighter cargo pays for the room it takes up. Use the calculator below to get the density of a carton and see which side of the line it falls on.

Shipping density calculator

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

How the 1:6000 rule works

DHL Global Forwarding states the air freight density ratio as 1:6,000 and gives the formula ((L × W × H in centimeters) ÷ 6,000) × number of packages. Maersk describes the 6,000 divisor as an industry standard set by IATA. The airline (through your forwarder) then bills whichever figure is higher.

Air Cargo Density: An old-fashioned balance scale with weights, symbolizing measurement and comparison.

The formulas you need:

  • Volumetric weight (kg) = L × W × H (cm) ÷ 6,000 × number of pieces
  • Chargeable weight = the greater of actual gross weight and volumetric weight
  • Density (kg/m³) = actual gross weight (kg) ÷ volume (m³)

The break-even comes straight from the divisor. One cubic meter is 1,000,000 cm³, and 1,000,000 ÷ 6,000 = 166.67 kg. So every cubic meter is billed as at least 166.67 kg. In imperial units: 166.67 × 2.20462 ÷ 35.3147 = 10.4 lb/ft³.

If your cargo is lighter than the break-even, a quick shortcut tells you the penalty: chargeable ÷ actual = 166.67 ÷ air cargo density. Cargo at 100 kg/m³ is billed at 166.67 ÷ 100 = 1.67 times its real weight.

Density bands and what you pay for

The table shows how the billing basis shifts as density rises. The last column is how many chargeable kilograms you pay per kilogram actually shipped.

A model of a military cargo truck on a white background.
Density (kg/m³)Density (lb/ft³)Billed onChargeable ÷ actual weight
754.68Volume2.22
1006.24Volume1.67
1509.36Volume1.11
166.6710.4Break-even1.00
25015.61Actual weight1.00
50031.21Actual weight1.00

Above the break-even, density stops mattering for the chargeable weight: you pay for every kilogram, and making the boxes smaller saves nothing. Below it, every bit of empty space is billed. This is the same density idea explained in shipping density in kg/m³ and lb/ft³, applied to the airline divisor.

Example 1: dense cargo (machinery parts)

Say you are flying two wooden crates of pump parts, each 120 × 100 × 80 cm (47.2 × 39.4 × 31.5 in) and 450 kg.

A Bosch car starter motor, a dense machinery part.
  • Volume per crate: 1.20 × 1.00 × 0.80 = 0.96 m³, so 2 × 0.96 = 1.92 m³ in total
  • Volumetric weight per crate: 120 × 100 × 80 = 960,000 cm³ ÷ 6,000 = 160 kg, so 2 × 160 = 320 kg
  • Actual weight: 2 × 450 = 900 kg
  • Density: 900 ÷ 1.92 = 468.75 kg/m³ (468.75 × 2.20462 ÷ 35.3147 = 29.26 lb/ft³)
  • Chargeable weight: 900 kg, because 900 is greater than 320

Here the crate size is almost irrelevant. What matters is an accurate gross weight, including the crate and any pallet, and whether heavy single pieces need special handling. Ask your forwarder about piece-weight and floor-loading limits for the aircraft on your route before you book.

Example 2: light cargo (apparel)

Now take 40 cartons of padded jackets, each 60 × 50 × 40 cm (23.6 × 19.7 × 15.7 in) and 9 kg.

A worker in a factory wearing a mask and hat, with red trays.
  • Volumetric weight per carton: 60 × 50 × 40 = 120,000 cm³ ÷ 6,000 = 20 kg
  • Total volumetric weight: 40 × 20 = 800 kg
  • Total actual weight: 40 × 9 = 360 kg
  • Volume: 0.60 × 0.50 × 0.40 = 0.12 m³ per carton, × 40 = 4.8 m³
  • Density: 360 ÷ 4.8 = 75 kg/m³
  • Chargeable weight: 800 kg, which is 800 ÷ 360 = 2.22 times the real weight

This is the shipment where packing decisions pay off. For a fuller walk-through of the chargeable-weight method itself, see how to calculate air freight chargeable weight.

Packing light cargo to cut chargeable weight

Because light cargo is billed on space, every centimeter you remove lowers the bill in direct proportion.

White packing peanuts, used for cushioning and filling space in packages.

Compress soft goods

Vacuum-packing jackets or bedding can shrink a carton considerably. For example, suppose compression lets the apparel cartons above drop to 60 × 50 × 30 cm:

  • 60 × 50 × 30 = 90,000 cm³ ÷ 6,000 = 15 kg per carton
  • 40 × 15 = 600 kg chargeable, down from 800 kg
  • Saving: 800 − 600 = 200 kg, or 25%

The shipment is still below the break-even (360 ÷ 3.6 m³ = 100 kg/m³), so it is still billed on volume, just less of it.

Right-size cartons and cut void fill

Match the carton to the product, remove loose filler where the product can take it, and pack more units per carton if the carton strength and handling weight allow. The guide on choosing carton sizes to cut CBM covers this in detail.

Ship knocked down

Furniture, racks and displays shipped flat-packed take a fraction of the assembled volume. If assembly at destination is practical, this is often the single biggest lever.

Measure the finished carton

Airlines bill the outside dimensions, including bulges, straps and pallet overhang. Measure after packing, not from the carton supplier’s spec sheet.

Consolidating light and dense cargo

When light and dense goods travel together as one consignment, the chargeable weight is calculated on the combined totals. Using the two examples above:

Warehouse with shelves full of boxes and pallets, and a forklift.
  • Combined actual weight: 900 + 360 = 1,260 kg
  • Combined volume: 1.92 + 4.8 = 6.72 m³
  • Combined volumetric weight: 6,720,000 cm³ ÷ 6,000 = 1,120 kg
  • Chargeable weight: 1,260 kg, against 900 + 800 = 1,700 kg if shipped separately
  • Difference: 1,700 − 1,260 = 440 kg

The combined density is 1,260 ÷ 6.72 = 187.5 kg/m³, just above the break-even, so the dense crates “absorb” the empty space of the jackets. This only works when the goods move on the same air waybill, from the same origin to the same destination at the same time. Forwarders use the same principle when they consolidate many shippers’ freight; whether you see the benefit depends on how your forwarder bills you, so ask whether your rate applies to your own consignment’s chargeable weight. The same logic drives heavy vs bulky goods decisions across all modes.

Common mistakes

  • Using the courier divisor for airline cargo. Express couriers such as DHL Express use 5,000 cm³/kg, which puts the break-even at 200 kg/m³ (12.49 lb/ft³). Airline cargo quotes normally use 6,000. Check which one your quote states.
  • Calculating density from net weight. However, use gross weight with cartons, pallets and packing.
  • Rounding dimensions down. Carriers measure the outside of the package; as a result, rounding in your favor just leads to a corrected invoice.
  • Assuming dense cargo is cheap to fly. Dense cargo has no volume penalty, but it pays for every kilogram. Compare against sea or rail before booking; see air vs sea freight.
  • Ignoring the conversion step. If your packing list is in m³, convert CBM to chargeable kg before comparing quotes.

FAQ

What is a good air cargo density?

Anything at or above 166.67 kg/m³ (10.4 lb/ft³) has no volume penalty under the 1:6000 rule, because you are billed on actual weight. Below that air cargo density, you pay for space you are not filling with weight.

How do I convert air cargo density to lb/ft³?

Multiply kg/m³ by 2.20462 and divide by 35.3147, or simply divide by about 16.02. For example, 250 kg/m³ is 15.61 lb/ft³.

Does 1:6000 apply to every airline shipment?

DHL Global Forwarding and Maersk both describe 6,000 as the standard for air freight, but always confirm the divisor printed on your quote. Some quotes, especially courier ones, use 5,000.

Does packing tighter help heavy cargo?

No. Once density is above 166.67 kg/m³ you are billed on actual weight, so smaller boxes do not reduce the chargeable weight. Lighter packaging materials are the only lever.

Can I calculate density for a whole shipment rather than per carton?

Yes. Divide the total gross weight by the total volume for air cargo density. Chargeable weight for a single consignment is normally worked out on those totals, which is why mixing dense and light goods can help.

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in Air Freight & Courier

Air Freight & Courier →

Leave a Reply

Your email address will not be published. Required fields are marked *