First, you calculate each box’s cubic volume. This helps you find CBM for multiple carton sizes. You multiply its length, width, and height in meters. Next, multiply each result by its carton quantity. Finally, add the totals together. For example, a packing list might have 80 large carton boxes. It could also have 150 medium and 40 small boxes. You calculate this line by line. Then, you sum the cubic meters. This gives you the total volume. In addition, you can find the chargeable weight with a calculator.
Multi-size shipment CBM calculator
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
use our carton CBM calculator for multiple carton sizes
A standard packing list categorizes goods by box dimension and weight. Calculating total volume requires evaluating each distinct line item separately rather than estimating across the whole shipment.

- Measure each carton size: Record the maximum exterior length, width, and height of one representative carton for every line item. Convert all measurements to meters (divide centimeters by 100, or inches by 39.37).
- Calculate single-carton volume: You can find cubic meters (m³) per carton. Multiply length × width × height in meters. So, L × W × H (m) = m³ per carton.
- Determine line-item volume: Multiply the single-carton m³ by the number of cartons in that line. This gives you the line CBM. Therefore, m³ per carton × quantity = line CBM.
- Calculate line-item gross weight: Multiply the gross weight of one packed carton by the line quantity. This provides the line weight. Thus, weight per carton × quantity = line weight.
- Sum the total shipment values: Add the CBM of all lines to find total CBM. Also, add the weight of all lines to get total gross weight.
Never average carton dimensions for volume. Averaging mixed box sizes causes significant errors. Volume scales exponentially. This impacts freight billing and container packing estimates. If you measure in centimeters, multiply length × width × height. Then divide by 1,000,000. If you measure in inches, divide total cubic inches by 61,023.7. This converts to CBM. For single-carton fundamentals, use a carton CBM calculator or see how to calculate CBM for shipping.
Worked example: mixed shipment measured in centimeters
Consider an importer receiving a kitchenware shipment split across three distinct carton specifications on the supplier packing list:

| Line | Carton size (cm) | Qty | m³ per carton | Line CBM (m³) | kg per carton | Line weight (kg) |
|---|---|---|---|---|---|---|
| A | 55 × 45 × 40 | 80 | 0.0990 | 7.92 | 14.0 | 1,120 |
| B | 40 × 30 × 25 | 150 | 0.0300 | 4.50 | 6.5 | 975 |
| C | 70 × 50 × 35 | 40 | 0.1225 | 4.90 | 18.0 | 720 |
| Total | — | 270 | — | 17.32 | — | 2,815 |
The explicit line-by-line working follows:
- Line A: 0.55 m × 0.45 m × 0.40 m = 0.099 m³ per carton. Multiply by 80 cartons = 7.92 m³. Total gross weight: 14 kg × 80 = 1,120 kg.
- Line B: 0.40 m × 0.30 m × 0.25 m = 0.030 m³ per carton. Multiply by 150 cartons = 4.50 m³. Total gross weight: 6.5 kg × 150 = 975 kg.
- Line C: 0.70 m × 0.50 m × 0.35 m = 0.1225 m³ per carton. Multiply by 40 cartons = 4.90 m³. Total gross weight: 18 kg × 40 = 720 kg.
- Shipment Totals: 7.92 + 4.50 + 4.90 = 17.32 m³; combined gross weight: 1,120 + 975 + 720 = 2,815 kg.
To convert this volume into cubic feet for North American freight standards, multiply 17.32 m³ by 35.3147. You will get 611.65 ft³. Overall cargo density equals actual gross weight divided by total volume. So, 2,815 kg ÷ 17.32 m³ = 162.5 kg/m³. The result from a CBM carton calculator determines which freight mode charges based on physical weight versus volumetric space.
How freight modes calculate chargeable weight for mixed cartons
Freight carriers compare physical gross weight against volumetric weight. They use standard industry conversion ratios. The higher value determines the final chargeable weight, a calculation often aided by a carton CBM calculator. However, different transport modes handle line-item rounding. They also apply ratios differently.

| Mode | Ratio applied | Volumetric conversion | Actual weight | Billed basis |
|---|---|---|---|---|
| Ocean LCL (W/M) | 1 m³ = 1,000 kg | 17.32 revenue tons | 2.815 metric tons | 17.32 W/M |
| Air Cargo | 1:6,000 (166.67 kg/m³) | 2,886.67 kg | 2,815 kg | 2,886.67 kg |
| Express Courier | 1:5,000 (200 kg/m³) | 3,464.00 kg | 2,815 kg | 3,464.00 kg |
Understanding how each mode evaluates the 17.32 m³ / 2,815 kg shipment:
- Ocean LCL (Less than Container Load): We bill this on a Weight or Measure (W/M) basis. Here, 1 m³ equals 1,000 kg (1 metric ton). The volume figure (17.32 m³) exceeds the actual weight (2.815 t). So, we charge freight on 17.32 revenue tons. Learn more about how LCL sea freight is calculated.
- Air Cargo: Uses the IATA volumetric ratio of 1:6,000 (166.67 kg per m³). Multiplying 17.32 m³ by 166.67 kg/m³ yields 2,886.67 kg. Because cargo density (162.5 kg/m³) falls slightly under the air threshold, volumetric weight governs billing. See detailed rules on air freight chargeable weight.
- Express Courier: Commercial couriers like DHL, FedEx, and UPS enforce a 1:5,000 ratio. This means 200 kg per m³. On a consolidated basis, this equals 3,464 kg. However, express couriers calculate dimensional weight per individual box. They do not use shipment totals, as the imperial example below shows.
Worked example: mixed cartons measured in inches
When you work with imperial measurements, air cargo and parcel carriers handle rounding differently. For example, consider a shipment with two box sizes:

- Line 1: 10 cartons measuring 24 × 18 × 12 inches, weighing 22 lb each.
- Next, Line 2: 15 cartons measuring 16 × 12 × 10 inches, weighing 9 lb each.
Step 1: Calculate total volume and actual weight
- Line 1 volume: 24 × 18 × 12 = 5,184 in³ per carton × 10 = 51,840 in³.
- Also, Line 2 volume: 16 × 12 × 10 = 1,920 in³ per carton × 15 = 28,800 in³.
- Total volume in cubic inches: 51,840 + 28,800 = 80,640 in³.
- Then, Total volume in m³: 80,640 ÷ 61,023.7 = 1.3215 m³.
- Total volume in ft³: 80,640 ÷ 1,728 = 46.67 ft³.
- Similarly, Total actual weight: (10 × 22 lb) + (15 × 9 lb) = 220 + 135 = 355 lb (161.03 kg).
Step 2: Compare bulk air freight vs per-package courier rules
Air Cargo (consolidated calculation): We evaluate dimensional weight on total shipment volume. We use the standard air ratio (1.3215 m³ × 166.67 kg/m³ = 220.25 kg = 485.5 lb). Therefore, the billed chargeable weight is approximately 220.3 kg (485.5 lb).
Express Courier (per-package calculation using 139 divisor): Couriers apply the dimensional divisor to each package individually. This divisor is 139 in³/lb. They round each box up to the next whole pound:
- Line 1 per carton: 5,184 in³ ÷ 139 = 37.29 lb. They round this up to 38 lb. The actual weight is 22 lb, so dimensional weight applies. As a result, 38 lb × 10 cartons equals 380 lb.
- Line 2 per carton: 1,920 in³ ÷ 139 = 13.81 lb. They round this up to 14 lb. The actual weight is 9 lb, so dimensional weight applies. Consequently, 14 lb × 15 cartons equals 210 lb.
- Total courier billed weight: 380 lb + 210 lb = 590 lb.
Calculating dimensional weight per package yields a 590 lb billed weight. However, calculating volume in bulk across the entire shipment yields 485.5 lb. Divisors vary depending on service contracts. For example, FedEx, UPS Daily Rates, and USPS use 139. Retail counter rates use 166. See our dimensional weight calculator guide for carrier-specific rules and a carton CBM calculator.
How to set up a CBM spreadsheet for packing lists
When handling complex shipments with dozens of SKU sizes, standardizing your packing list in a spreadsheet prevents calculation mistakes. Organize columns logically across each row:

- Column A: Line Item / SKU Code
- Column B: Carton Quantity (Qty)
- Columns C, D, E: External Length, Width, Height (in cm or inches)
- Column F: Gross Weight per Carton (kg or lb)
- Next, Column G (Single CBM): Formula
=(C2*D2*E2)/1000000for cm - Column H (Line CBM): Formula
=G2*B2 - Also, Column one (Line Weight): Formula
=F2*B2
Place summary `=SUM()` formulas in the bottom row. This calculates total quantity, combined CBM, and total gross weight. Always keep individual length, width, and height values in distinct columns for a CBM carton calculator. Do not combine them into text strings like “55x45x40”. Combining dimensions prevents dynamic spreadsheet calculation. It also increases manual data entry errors.
Why total volume does not guarantee container capacity
A calculated total volume of 17.32 m³ mathematically fits inside a standard 20-foot dry sea container. This container offers an internal volume of approximately 33.2 m³. However, total cubic volume alone does not prove all physical cartons will fit, according to a carton CBM calculator.

Real-world packing efficiency is constrained by physical packaging limits:
- Box Rigidity and Interlocking Gaps: Cartons are rigid rectangular blocks. When stacking multiple carton sizes, empty gaps remain where box edges do not align perfectly. Freight forwarders call this unfillable space “broken stowage.”
- Weight Distribution and Orientations: You cannot stack heavy cartons on top of fragile or lighter boxes. Also, cartons marked with orientation arrows (“This Side Up”) limit your stacking options.
- Practical Fill Limits: Operational guidelines provide realistic 20-foot container capacity. This capacity is between 25 m³ and 28 m³. Also, 40-foot containers have 67.7 m³ internal capacity. Realistically, they accommodate 54 m³ to 58 m³.
Logistics provider iContainers emphasizes that cargo volume matching nominal container volume “is not automatically suitable” without a package-level stacking plan. For detailed carton packing math, review how many cartons fit in a container in a carton CBM calculator.
Common errors when calculating mixed shipment volume
- Mixing measurement units across lines: You create severe volumetric errors when you enter some carton dimensions in inches. You also create errors when you use centimeters. Therefore, you must standardize your units. Convert all lines to a single unit before applying formulas.
- Measuring internal box dimensions: Using inner box measurements is not accurate. It misses the extra exterior thickness of corrugated cardboard. Also, it ignores bulging side walls and exterior corner protectors. Always measure outer edge to outer edge. Learn exact techniques in how to measure cartons and pallets.
- Omitting pallet dimensions: You must calculate palletized cargo volume. Base this on the outer footprint of the wooden pallet. Then, multiply this by the total height. This height goes from the floor to the top of the upper carton layer. Do not just add up loose carton volumes alone.
- Confusing net weight with gross weight: Volumetric ratio calculations require total gross weight. This includes goods, cartons, and packing material. Therefore, do not use net product weight.
- Applying bulk air formulas to express courier shipments: Express parcel services calculate volumetric weight for each individual box. They round this up to the nearest whole unit. However, heavy air freight forwarders aggregate cubic volume. Then they apply chargeable ratios.
Frequently asked questions
Can CBM for different carton sizes simply be added together?
Yes, cubic volume is additive. You can calculate individual CBM for each line item. Use length × width × height × quantity in a carton CBM calculator. Then, add the line totals together. This yields the exact physical volume of the total shipment.
Is chargeable weight calculated on individual lines or total volume?
For ocean LCL and commercial air cargo, freight forwarders apply volume-to-weight conversion ratios to combined shipment totals. Express couriers (such as DHL, FedEx, and UPS) evaluate dimensional weight for each carton individually and sum the rounded results.
Will 25 m³ of mixed cartons fit into a standard 20ft shipping container?
No, this is not always true. A 20ft container has an internal volume of 33.2 m³. However, practical loading limits range between 25 m³ and 28 m³. This is because of unusable space between uneven box sizes. You should request a 3D load plan from your forwarder, or use a carton CBM calculator. This will confirm the fit.
What should you do if a supplier provides total volume without carton dimensions?
Request an itemized packing list. It should show the outer length, width, height, gross weight, and quantity. Include this for every carton size. Without specific carton dimensions, you cannot check container space efficiency. Therefore, you cannot verify courier dimensional weight charges, even with a CBM carton calculator.
Related guides
- Furniture CBM Calculator: How to Estimate Volume for Furniture and Household Moves
- Pallet CBM Calculator: How to Calculate the CBM of a Pallet
- CBM Calculator in Inches: How to Calculate CBM from Inches
- How Freight Cost Is Calculated: Air, Sea, Road and Courier
Sources and further reading
- iContainers: 40-Foot Container Guide: This guide covers container dimensions. Also, it includes pallet loading limits and stowage factors.
- DHL Global Forwarding: Calculating Chargeable Weight: Industry standard volumetric billing ratios across air, ocean, and road freight.
- NIST SP 811: Conversion Factors: Official metric and imperial unit conversion standards.
