CBM & Volume

Shipping Density Explained: kg per m³ and lb per ft³

Shipping Density Explained: kg per m³ and lb per ft³

Shipping density measures how much weight cargo holds per unit of volume, calculated by dividing total weight by total volume in kilograms per cubic meter (kg/m³) or pounds per cubic foot (lb/ft³). Freight carriers use this density calculation to determine whether a shipment is billed by its actual weight or its volumetric space across different modes.

Every transport method—whether air, ocean, rail, or courier—has a specific break-even threshold. If your shipment’s density falls below that threshold, the carrier charges based on dimensional volume rather than actual scale weight. You can use the calculator below to determine your cargo’s density in metric and imperial units instantly.

Shipping density calculator

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

How to calculate shipping density step by step

To calculate shipping density, you need two exact numbers from your packed cargo: total gross weight and total outer cubic volume. Gross figures must account for all packaging material, strapping, boxes, and pallets.

Shipping density: A blank paper tag inside a shipping box with packing paper

The density formula

The standard formula for shipping density is simple:

Density = Total Gross Weight ÷ Total Cubic Volume

  • Metric system: Total weight in kilograms (kg) ÷ Total volume in cubic meters (m³) = kg/m³
  • Imperial system: Total weight in pounds (lb) ÷ Total volume in cubic feet (ft³) = lb/ft³ (often designated as PCF, or pounds per cubic foot)

Converting between kg/m³ and lb/ft³

International trade frequently requires converting between metric and imperial density units when moving freight across borders or switching between ocean and North American trucking carriers.

  • kg/m³ to lb/ft³: Multiply kg/m³ by 0.06243
  • lb/ft³ to kg/m³: Multiply lb/ft³ by 16.018

For example, if your shipment has a metric density of 168 kg/m³, multiplying 168 by 0.06243 gives 10.49 lb/ft³. Reversing the step, 10.49 lb/ft³ multiplied by 16.018 equals 168.0 kg/m³.

How to measure volume accurately for density

Calculating accurate volume requires measuring the extreme outside points of each package or pallet load. Carrier dimensions always reflect the maximum outer envelope:

  1. Measure maximum dimensions: Record the length, width, and height in centimeters or inches. Include any box bulging, handles, corner protectors, or pallet overhang.
  2. Calculate individual package volume: Multiply L × W × H. For metric, convert cm to meters before multiplying (for instance, 60 cm = 0.6 m). For imperial, multiply inches and divide the result by 1,728 to get cubic feet.
  3. Include pallet height and tare weight: For palletized cargo, measure from the floor to the top edge of the load. Add the weight of the wooden or plastic pallet (typically 15 kg to 22 kg / 33 lb to 50 lb) to your item weight.
  4. Sum total volume and total weight: Multiply single-unit volume and weight by the total number of identical packages before running the density calculation.

Break-even shipping densities across freight modes

Carriers use volumetric weight ratios (also called dimensional factors or divisors) to protect their transport capacity. Turning these divisors into density numbers reveals the exact break-even point where actual scale weight begins to govern pricing instead of dimensional volume.

Stacked shipping containers with a cargo airplane flying overhead
Mode or rule Ratio / Divisor kg per m³ lb per ft³
Air cargo (IATA standard) 1:6,000 cm³/kg 166.67 10.40
Express courier, metric (DHL Express, FedEx, Parcelforce) 1:5,000 cm³/kg 200.00 12.49
US parcel, 139 in³/lb (FedEx, UPS Daily, USPS from 12 July 2026) 139 in³/lb 199.10 12.43
UPS Retail, Canada Post Regular Parcel 166 in³/lb 166.70 10.41
Australia Post cubic weight 250 kg/m³ 250.00 15.61
Rail freight (DHL) 1:3,000 cm³/kg 333.33 20.81
Sea LCL (ocean freight W/M) 1 m³ = 1,000 kg 1,000.00 62.43

Understanding how these break-even values are derived clarifies why carriers charge what they do:

  • Metric conversion math: One cubic meter contains 1,000,000 cubic centimeters (cm³). Dividing 1,000,000 by the air cargo factor of 6,000 yields a threshold of 166.67 kg/m³. Dividing 1,000,000 by the courier factor of 5,000 yields 200 kg/m³.
  • Imperial conversion math: One cubic foot contains 1,728 cubic inches (in³). Dividing 1,728 by a parcel divisor of 139 yields 12.43 lb/ft³. Multiplying 12.43 by 16.018 converts it to 199.1 kg/m³.

Regional road transport operates under custom carrier rules. European road freight relies heavily on loading meters (LDM) rather than standard cubic dimensions. For instance, DB Schenker’s international land transport conditions define a standard density conversion where 1 m³ equals 333 kg. For more details on calculating deck space for overland trucking, check the loading meter guide.

Worked examples: density calculations in practice

Worked example 1: bulky goods by air vs sea

Imagine importing 30 cartons of decorative couch cushions, where each carton measures 60 × 50 × 50 cm and weighs 9 kg.

A yellow measuring tape extended on a white background
  1. Volume per carton: 0.6 m × 0.5 m × 0.5 m = 0.15 m³.
  2. Total shipment volume: 0.15 m³ × 30 = 4.5 m³.
  3. Total shipment weight: 9 kg × 30 = 270 kg.
  4. Cargo density: 270 kg ÷ 4.5 m³ = 60 kg/m³ (or 60 × 0.06243 = 3.75 lb/ft³).

Comparing this shipment against modal rules:

  • Air cargo: Because 60 kg/m³ is far below the air break-even density of 166.67 kg/m³, the airline bills on volumetric weight. Volumetric weight = 4.5 m³ × 166.67 = 750 kg. You pay for 750 kg of chargeable weight—2.78 times your actual physical weight of 270 kg.
  • Ocean LCL freight: Ocean freight applies a Weight/Measurement (W/M) ratio where 1 m³ equals 1,000 kg. Billable revenue tons = max(4.5 m³, 0.27 tonnes) = 4.5 revenue tons. Ocean freight also bills on space, but overall ocean freight rates per CBM are significantly lower than air freight rates per kilogram.

Worked example 2: dense industrial machinery parts

Consider shipping a compact crate containing steel machine components measuring 1 m³ and weighing 400 kg (density = 400 kg/m³).

  • Air cargo: Since 400 kg/m³ is higher than 166.67 kg/m³, the chargeable weight equals the actual weight of 400 kg. You pay zero penalty for volumetric space.
  • Ocean LCL freight: Revenue tons = max(1 m³, 0.4 tonnes) = 1 revenue ton.

Dense goods get maximum economic value out of air freight space because you pay only for actual weight. For a deeper breakdown of cost trade-offs between transport modes, explore the air vs sea comparison.

Worked example 3: US LTL freight class determination

In US Less-Than-Truckload (LTL) shipping, freight density (in pounds per cubic foot) directly influences your National Motor Freight Classification (NMFC) freight class for density-based commodities.

Suppose you ship a standard skid measuring 48 × 40 × 60 inches (including pallet height) with a gross weight of 560 lb.

  1. Cubic feet calculation: (48 in × 40 in × 60 in) ÷ 1,728 = 115,200 in³ ÷ 1,728 = 66.67 ft³.
  2. Density calculation: 560 lb ÷ 66.67 ft³ = 8.40 lb/ft³.
  3. 2025 NMFC 13-sub scale lookup: A density between 8 and less than 10 lb/ft³ falls into Class 100 under the NMFC density scale effective 19 July 2025.
  4. Historical FCDC guideline lookup: Under older non-subsided Freight Classification Development Council guidelines, a density of at least 8 lb/ft³ mapped to Class 110.

Because many carrier lookup tools still reflect legacy charts, the exact same shipment can show up as Class 100 or Class 110 depending on the chart version. Always verify your specific NMFC item code with your freight broker. You can calculate your classification using the freight class calculator and read details in our NMFC 2025 changes guide.

Using shipping density to choose the right mode and lower costs

Calculating shipping density before requesting freight quotes allows you to anticipate billable charges and adjust your strategy accordingly:

A gantry crane lifting a shipping container at a freight port
  1. Density below 166.67 kg/m³ (10.4 lb/ft³): Cargo is light and bulky. You will pay for volume in air freight, express parcel, and sea LCL. Focus heavily on package redesign, compression, and removing void space to reduce billable cubic volume.
  2. Density between 167 and 200 kg/m³: Air cargo charges by actual weight, but metric express couriers (using a 5,000 divisor) still charge for volumetric space.
  3. Density between 200 and 1,000 kg/m³: Both air cargo and express parcel services bill strictly on actual scale weight. Ocean LCL continues billing on cubic meters.
  4. Density above 1,000 kg/m³ (62.43 lb/ft³): Ocean LCL bills based on metric tons rather than volume. On full container loads (FCL), keep a close eye on legal road weight limits before filling the container’s physical volume.

While density dictates whether you are charged by space or weight, overall freight costs also depend on base rates per kilogram or per cubic meter across different transport modes. Learn how to manage these cost dynamics in our heavy vs bulky goods guide.

Common density mistakes and how to avoid them

  • Ignoring pallet tare weight and dimensions: Always include the height and weight of skids, crates, and pallets. Freight carriers measure the total load as presented for pickup.
  • Measuring box interior dimensions: Always measure the exterior of packed boxes. Bulging sides from tight packing add billable inches that re-rate cargo into higher cost tiers.
  • Mixing metric and imperial units: Dividing kilograms by cubic feet or pounds by cubic meters produces meaningless density numbers. Convert all units to metric (kg and m³) or imperial (lb and ft³) before dividing.
  • Averaging density across mixed commodity shipments: Calculating a single average density for a pallet holding different NMFC items can cause carrier reclassifications and re-weigh penalties. Calculate density individually for each commodity item.
  • Failing to account for box compression during transit: Stacking cartons can cause bottom boxes to bulge outward, increasing measured volume when scanned by automatic carrier dimming machines.

Frequently asked questions

What is a good shipping density?

There is no single good shipping density because ideal numbers depend on your chosen shipping mode. However, matching or exceeding your carrier’s break-even point—such as 166.67 kg/m³ for air cargo or 200 kg/m³ for express couriers—ensures you pay for actual weight rather than paying extra for empty air space.

How do I convert kg/m³ to lb/ft³?

To convert kg/m³ to lb/ft³, multiply the metric density by 0.06243. For example, 500 kg/m³ × 0.06243 = 31.2 lb/ft³. To convert back from lb/ft³ to kg/m³, multiply by 16.018.

Why does shipping density matter for LTL freight class?

In US LTL trucking, NMFC freight classes for density-based commodities are assigned directly from pounds per cubic foot (PCF). Lower density items receive higher class numbers, which generally command higher shipping rates per hundredweight.

Is shipping density the same as chargeable weight?

No, shipping density is a ratio of weight to volume, whereas chargeable weight is the final weight figure used on your freight bill. Chargeable weight is calculated as the greater value between physical weight and volumetric weight, and density tells you which of those two numbers will apply.

Does pallet weight count toward shipping density?

Yes, pallet weight and height count toward shipping density. Freight carriers measure total gross weight and overall exterior dimensions of the complete pallet load, including the wooden or plastic pallet itself.

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in CBM & Volume

CBM & Volume →

Leave a Reply

Your email address will not be published. Required fields are marked *