Rail freight chargeable weight is the greater of the actual weight and the volumetric weight, where DHL Global Forwarding uses a density ratio of 1:3,000 for rail. That means every cubic meter is billed as at least 333.33 kg, twice the 166.67 kg used for air and a third of the 1,000 kg used for sea LCL. The calculator below is set to the 3,000 divisor so you can test your own cartons.
Air freight chargeable weight calculator
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
The formula for rail freight chargeable weight
DHL Global Forwarding’s guide to chargeable weights lists the density ratio for rail as 1:3,000, alongside 1:6,000 for air and 1:1,000 for sea. Applied to your cargo:

- Rail volumetric weight (kg) = L × W × H (cm) ÷ 3,000
- Or: volume (m³) × 333.33
- Chargeable weight = the greater of actual gross weight and volumetric weight
Where 333.33 comes from: 1,000,000 cm³ ÷ 3,000 = 333.33 kg per m³. In imperial units that is 333.33 × 2.20462 ÷ 35.3147 = 20.8 lb/ft³.
Other rail operators and forwarders may use a different ratio, so check the divisor stated on your quote. Rail freight chargeable weight matters mainly for groupage (shared container) rail. If you book a whole container, ask whether the quote is per container or per chargeable kilogram.
How rail billing compares with air and sea
| Mode | Density ratio | kg counted per m³ | lb counted per ft³ |
|---|---|---|---|
| Air cargo | 1:6,000 | 166.67 | 10.4 |
| Express courier | 1:5,000 | 200 | 12.49 |
| Rail | 1:3,000 | 333.33 | 20.81 |
| European road (international) | 333 kg/m³ | 333 | 20.79 |
| Sea LCL (W/M) | 1:1,000 | 1,000 | 62.43 |
Rail sits between air and sea for how much weight it gives you per cubic meter. Interestingly, the international road ratio in DB Schenker’s and DSV’s European land transport conditions is 1 m³ = 333 kg (DSV uses 360 kg for the UK and Ireland and 350 kg for the Nordic countries), effectively the same as rail’s 1:3,000. Road freight in Europe is also priced by loading meter, so that is not the only rule for rail freight chargeable weight that applies on the road.

The key point for planning: rail bills light cargo on twice as many kilograms as air does. That does not make rail dearer, because the market and your forwarder set rail freight chargeable weight rates per kilogram, but it changes the break-even you should use when comparing quotes.
Example 1: light cargo (flat-pack furniture parts)
Say you are sending a groupage rail shipment of furniture components: 6 m³ and 900 kg.

- Density: 900 ÷ 6 = 150 kg/m³ (light)
- Rail volumetric: 6,000,000 cm³ ÷ 3,000 = 2,000 kg, so chargeable 2,000 kg
- Air volumetric: 6,000,000 ÷ 6,000 = 1,000 kg, so chargeable 1,000 kg (actual is 900)
- Sea LCL: greater of 6 m³ and 0.9 t = 6 revenue tons
How to compare without knowing the rates in advance:
- Rail vs air: rail is cheaper if rail rate per kg × 2,000 is less than air rate per kg × 1,000. In other words, the rail rate per kg must be less than half the air rate per kg.
- Rail vs sea: rail is cheaper if rail rate per kg × 2,000 is less than sea rate per revenue ton × 6. That means rail rate per kg must be less than the sea rate per revenue ton ÷ 333.33.
Example rates to make this concrete (invented; replace with your quotes): air 4.00 per kg, rail 1.20 per kg, sea 80 per revenue ton.
- Air: 1,000 × 4.00 = 4,000
- Rail: 2,000 × 1.20 = 2,400
- Sea: 6 × 80 = 480
Example 2: dense cargo (auto parts)
Now a dense consignment: 3 m³ and 2,400 kg.

- Density: 2,400 ÷ 3 = 800 kg/m³
- Rail volumetric: 3,000,000 ÷ 3,000 = 1,000 kg, so chargeable 2,400 kg (actual)
- Air volumetric: 3,000,000 ÷ 6,000 = 500 kg, so chargeable 2,400 kg (actual)
- Sea LCL: greater of 3 m³ and 2.4 t = 3 revenue tons
For dense cargo, air and rail bill the same 2,400 kg, so the cheaper one is simply the one with the lower rate per kg. Against sea, rail must beat the sea rate per revenue ton ÷ 800 per kg (because 2,400 kg ÷ 3 revenue tons = 800 kg per revenue ton).
With the same example rates:
- Air: 2,400 × 4.00 = 9,600
- Rail: 2,400 × 1.20 = 2,880
- Sea: 3 × 80 = 240
| Measure | Example 1 (furniture parts) | Example 2 (auto parts) |
|---|---|---|
| Volume (m³) | 6 | 3 |
| Actual weight (kg) | 900 | 2,400 |
| Rail chargeable (kg) | 2,000 | 2,400 |
| Air chargeable (kg) | 1,000 | 2,400 |
| Sea revenue tons | 6 | 3 |
Where China–Europe rail fits
Forwarders commonly offer rail services linking China and Europe as a middle option between sea and air for goods that need to move faster than a sailing allows but do not justify air rates. Whether it suits you depends on your lane, your timing and current schedules, so ask forwarders for transit times, departure frequency and cut-off dates rather than relying on general claims.

Points to check before booking:
- The ratio on the quote. Confirm 1:3,000 or whatever your provider uses.
- Groupage or full container. For a full container, the CBM capacity of 20ft and 40ft boxes and the payload limit matter more than chargeable weight.
- What is included. Origin pickup, terminal handling, customs at the border points and final delivery may be separate lines.
- Cargo restrictions. Ask whether your goods are accepted on the service.
Common mistakes
- Applying the air divisor to rail. Using 6,000 instead of 3,000 halves the chargeable weight of light cargo and makes rail look cheaper than forwarders will invoice it.
- Comparing per-kg rates directly. A low rail rate per kg can still cost more than air for very light goods, because rail counts twice the kilograms. Always multiply by each mode’s chargeable weight.
- Forgetting the sea comparison. For light, non-urgent goods, sea’s 1,000 kg per m³ often wins clearly; see air vs sea freight and how LCL is calculated.
- Mixing up units. Convert your packing list carefully; CBM to kg shows each mode’s factor, and heavy vs bulky goods explains how density shifts the cheapest choice.
FAQ
What is the volumetric ratio for rail freight?
DHL Global Forwarding uses 1:3,000, which equals 333.33 kg per cubic meter. Other providers may differ, so check your quote.
How do I calculate rail chargeable weight?
Multiply length × width × height in centimeters, divide by 3,000, and compare the result with the actual gross weight. The higher figure is the chargeable weight.
Is rail cheaper than air?
It depends on the rates. For light cargo, the rail rate per kg must be below half the air rate per kg to be cheaper, because rail freight chargeable weight counts twice as many kilograms per cubic meter.
Does chargeable weight apply to full rail containers?
Full-container bookings often quote per container. Ask your provider whether your quote is per container or per chargeable kilogram.
Why is rail’s ratio the same as European road freight?
DB Schenker’s and DSV’s international land transport conditions both use 1 m³ = 333 kg for most international lanes, which matches 1:3,000. The figure is a commercial convention set by each provider.
Related guides
- Air Freight Chargeable Weight Calculator: How to Calculate It
- Volumetric Weight Calculator: Air, Courier and Parcel Divisors
- Express Courier vs Air Cargo: Which Is Cheaper for Your Shipment?
- How to Reduce Dimensional Weight Charges on Parcels
Sources and further reading
- DHL Global Forwarding: Calculating Chargeable Weight: air 1:6,000, sea 1:1,000 and rail 1:3,000 ratios.
- DB Schenker: Transport Conditions, Land (PDF): kg per loading meter and per pallet place.
