Sea Freight & Containers

Broken Stowage: Why You Cannot Use a Container’s Full Volume

Broken Stowage: Why You Cannot Use a Container's Full Volume

Broken stowage is the space inside a container that your cargo cannot use: gaps between cartons and walls, clearance under the ceiling, corrugated side walls, and room taken by dunnage and pallets. Even with a perfect stack and no clearance, 60 × 40 × 30 cm cartons fill only 64.8 m³ of a 76.3 m³ 40ft high cube (84.9%). One forwarder rule of thumb puts typical real loads at 75–92% of theoretical volume, depending on the container. Use the calculator below to see how your carton fits, then add your own clearance.

Container loading calculator (cartons per container)

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

What causes broken stowage

  • Carton size vs inside dimensions. If 2,350 mm of width takes five 400 mm cartons, the last 350 mm stays empty.
  • Corrugated walls. The side walls are profiled steel. However, one forwarder (Mighty Shipping) says this costs 2–3 cm of width.
  • Ceiling and door clearance. The same source says the top 5–10 cm is lost to door clearance, and the door opening is lower than the inside height.
  • Carton strength. Crush strength often limits stacking to about 6–8 tiers, so a tall box may never be filled to the roof.
  • Dunnage, airbags and lashing. Securing material occupies space.
  • Pallets. A pallet base and the gaps between pallets cost both height and floor area.
  • Irregular shapes and items marked “this way up”, which you cannot turn to fit better.

Typical utilization by container type

No container line publishes a usable-volume percentage. Therefore, the figures below are a forwarder rule of thumb (Mighty Shipping), not a standard:

Broken Stowage: A large container ship being loaded at a port by a crane.
ContainerTheoretical (m³)Typical real load (m³)Utilization (%)
20ft (20GP)33.225–2875–85
40ft (40GP)67.755–6081–89
40ft high cube (40HQ)76.465–6885–92
45ft high cube (45HQ)86.173–7885–92

Treat these as a sanity check, not a promise. Your own figure depends on your carton sizes. As iContainers puts it, “a shipment totaling 60 CBM is not automatically suitable for a container with more than 60 CBM of internal volume.”

How to calculate broken stowage

  1. Cartons that fit = floor(L ÷ l) × floor(W ÷ w) × floor(H ÷ h), in the best orientation, after subtracting any clearance from the inside dimensions
  2. Cargo volume = cartons that fit × carton volume
  3. Utilization (%) = cargo volume ÷ container volume × 100
  4. Broken stowage (%) = 100 − utilization

The examples below use Hapag-Lloyd’s 40ft high cube: 12,032 × 2,350 × 2,700 mm inside, 76.3 m³.

A container ship on the water, carrying many containers.

Example 1: two carton sizes at zero clearance

Carton A: 60 × 40 × 30 cm (23.6 × 15.7 × 11.8 in), volume 0.6 × 0.4 × 0.3 = 0.072 m³.

  • Length: 12,032 ÷ 600 = 20.05 → 20
  • Width: 2,350 ÷ 400 = 5.88 → 5
  • Height: 2,700 ÷ 300 = 9
  • 20 × 5 × 9 = 900 cartons; 900 × 0.072 = 64.8 m³; 64.8 ÷ 76.3 = 84.9%

The width wastes 2,350 − 5 × 400 = 350 mm along the whole box.

Carton B: 55 × 45 × 35 cm (21.7 × 17.7 × 13.8 in), volume 0.55 × 0.45 × 0.35 = 0.086625 m³. Best orientation: 35 cm along the length, 55 cm across, 45 cm upright.

  • Length: 12,032 ÷ 350 = 34.4 → 34
  • Width: 2,350 ÷ 550 = 4.27 → 4
  • Height: 2,700 ÷ 450 = 6
  • 34 × 4 × 6 = 816 cartons; 816 × 0.086625 = 70.686 m³; 70.686 ÷ 76.3 = 92.6%

The tidy-looking 60 × 40 × 30 carton is not automatically the efficient one. What matters is how each dimension divides into the box.

Example 2: the same cartons with real clearance

Both zero-clearance stacks reach exactly 2,700 mm, the full inside height, which a loader cannot do in practice. Take 30 mm off the width for corrugations and 50 mm off the height for clearance. As a result, usable space becomes 12,032 × 2,320 × 2,650 mm.

Carton A: the original orientation now gives 20 × 5 (2,320 ÷ 400 = 5.8) × 8 (2,650 ÷ 300 = 8.83) = 800. Turning the carton so 30 cm runs across and 40 cm stands upright does better:

  • 12,032 ÷ 600 = 20; 2,320 ÷ 300 = 7.73 → 7; 2,650 ÷ 400 = 6.63 → 6
  • 20 × 7 × 6 = 840 cartons; 840 × 0.072 = 60.48 m³; 60.48 ÷ 76.3 = 79.3%

Carton B: best orientation is now 55 cm along the length, 45 cm across and 35 cm upright:

  • 12,032 ÷ 550 = 21.88 → 21; 2,320 ÷ 450 = 5.16 → 5; 2,650 ÷ 350 = 7.57 → 7
  • 21 × 5 × 7 = 735 cartons; 735 × 0.086625 = 63.669 m³; 63.669 ÷ 76.3 = 83.4%
CartonCartons (no clearance)Utilization (%)Cartons (with clearance)Utilization (%)
60 × 40 × 30 cm90084.984079.3
55 × 45 × 35 cm81692.673583.4

Two lessons follow. First, 50 mm of headroom cost Carton B 81 cartons (816 − 735). Second, the best orientation changed once clearance was included, so always recalculate rather than reusing a zero-clearance plan.

Example 3: one carton, four containers

Carton A (60 × 40 × 30 cm) at zero clearance in Hapag-Lloyd boxes:

ContainerInside volume (m³)CartonsCargo (m³)Utilization (%)
20ft standard33.231522.6868.3
40ft standard67.770050.4074.4
40ft high cube76.390064.8084.9
45ft high cube86.099071.2882.9

In the 20ft and 40ft standard boxes, the 2,395 mm height takes only 7 tiers of 300 mm (2,100 mm), wasting 295 mm. However, the high cube’s 2,700 mm takes 9 tiers exactly. Therefore, the same carton loses far more space in a standard box.

How to use this when booking

  • Shipment of 62 m³ for a 40ft high cube? 62 ÷ 76.3 = 81.3%, below the 85–92% rule-of-thumb range, so it probably fits. Confirm with a carton-level count.
  • Shipment of 70 m³? 70 ÷ 76.3 = 91.7%, at the top of the range. Plan carefully or price a 45ft high cube instead (70 ÷ 86.0 = 81.4%).
  • See how many CBM fit in a 40ft container for the volume side and how many cartons fit in a container for counts.

Tips to reduce broken stowage

  • Design cartons around the box. First, check how each carton dimension divides into the inside length, width and height. Choosing carton sizes to cut CBM covers this from the packaging side.
  • Mix carton sizes deliberately. Smaller cartons can fill the last rows and the top gap. Work the totals with CBM for multiple cartons.
  • Floor-load where you can. Pallets add height and gaps; compare in palletized vs floor-loaded containers.
  • Plan dunnage, not just cartons. A container loading plan shows where securing material will go.
  • Check orientation limits with the supplier before choosing a layout that lays cartons on their side.

FAQ

What is broken stowage in shipping?

It is the part of a container’s volume that cargo cannot occupy, caused by gaps around cartons, wall corrugations, ceiling clearance, dunnage and pallets. Usually, we express it as a percentage of the container’s volume.

How much of a container can I actually use?

One forwarder rule of thumb gives 75–85% for a 20ft, 81–89% for a 40ft and 85–92% for a high cube. However, your figure depends on your carton dimensions and packing.

How do I calculate broken stowage?

Count the cartons that fit after clearance, multiply by carton volume, and divide by the container volume. Then, calculate broken stowage by subtracting that utilization from 100%.

Does a high cube reduce broken stowage?

It can. In the example above, 30 cm cartons fill 2,700 mm in exactly 9 tiers but waste 295 mm in a 2,395 mm standard box.

Is there an official broken stowage percentage?

No container line or regulator source publishes one. The ranges in this guide, therefore, are a forwarder rule of thumb.

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in Sea Freight & Containers

Sea Freight & Containers →

Leave a Reply

Your email address will not be published. Required fields are marked *