A 40ft high cube reefer is 11,580–11,600 mm long. It is also 2,275–2,294 mm wide inside. These reefer container dimensions affect its volume. Its nominal volume is 67–68 m³. Payload is 29.3–29.6 t. This depends on the carrier. Insulation and machinery reduce inside space. This reefer is smaller than a dry 40ft. Use the calculator below. It shows cartons fitting a 40ft reefer.
Container loading calculator (cartons per container)
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
40ft high cube reefer container dimensions by carrier
| Carrier | Inside L × W × H (mm) | Door W × H (mm) | Volume (m³) | Payload (kg) |
|---|---|---|---|---|
| Hapag-Lloyd | 11,599 × 2,290 × 2,425 | 2,290 × 2,557 | 67.7 | 29,580 |
| Maersk | 11,580 × 2,275 × 2,415 | 2,276 × 2,471 | 67.5 | 29,480 |
| CMA CGM | 11,584 × 2,294 × 2,557 | 2,284 × 2,567 | 68 nominal / 64.9 in use | 29,300 |
| ONE | 11,590 × 2,284 × 2,544 | 2,290 × 2,502 | 67.5 | 30,510 (see note) |
All four lines list a 34,000 kg maximum gross for this box. However, ONE’s published payload is 30,510 kg. Its 4,490 kg tare adds up to 35,000 kg. This does not match the rating. Therefore, confirm ONE’s figure before relying on it. The other three are consistent. Hapag-Lloyd’s 4,420 kg tare plus 29,580 kg payload equals 34,000 kg.

20ft reefer dimensions by carrier
| Carrier | Inside L × W × H (mm) | Volume (m³) | Tare (kg) | Payload (kg) |
|---|---|---|---|---|
| Hapag-Lloyd | 5,450 × 2,280 × 2,159 | 28.1 | 2,860 | 29,140 |
| Maersk | 5,451 × 2,290 × 2,167 | 27 | 2,990 | 27,490 |
| CMA CGM | 5,456 × 2,294 × 2,273 | 28.6 nominal / 27.3 in use | 3,010 | 27,470 |
| ONE | 5,456 × 2,288 × 2,263 | 28.2 | 2,810 | 27,670 |
Payload varies by 1,670 kg between these 20ft reefers. It ranges from 29,140 − 27,470 kg. This is partly because Hapag-Lloyd rates its 20ft reefer container dimensions at 32,000 kg gross. The others, however, list 30,480 kg.

CMA CGM publishes two volumes. You will see a nominal volume and an “in use” volume. However, the in-use figure is lower. For the 40ft, for example, it is 64.9 vs 68 m³. This reminds you that not all internal space is available for cargo. Always ask the carrier about the maximum loading height. This applies to the reefer container dimensions you book.
Reefer vs dry container
| Measure | Dry 40ft high cube | 40ft reefer high cube | Difference |
|---|---|---|---|
| Inside length (mm) | 12,032 | 11,599 | 433 |
| Inside width (mm) | 2,350 | 2,290 | 60 |
| Volume (m³) | 76.3 | 67.7 | 8.6 |
These figures are from Hapag-Lloyd. The reefer loses about 0.43 m of length. It also loses 60 mm of width. This changes how many cartons and pallets fit per row. So, do not reuse a dry-container load plan for a reefer. For dry boxes, see shipping container dimensions.
Worked example 1: cartons in a 40ft reefer
Say you ship chilled produce in cartons of 50 × 40 × 30 cm (19.7 × 15.7 × 11.8 in), 22 kg each, that must stay upright. Using Hapag-Lloyd’s 40ft reefer (11,599 × 2,290 × 2,425 mm):

- Length: 11,599 ÷ 500 = 23.2 → 23 cartons
- Width: 2,290 ÷ 400 = 5.7 → 5 cartons
- Height: 2,425 ÷ 300 = 8.08 → 8 tiers (8 × 300 = 2,400 mm, leaving only 25 mm)
- Total: 23 × 5 × 8 = 920 cartons
- Volume: 0.5 × 0.4 × 0.3 = 0.06 m³ × 920 = 55.2 m³
- Weight: 920 × 22 = 20,240 kg, under the 29,580 kg payload
A dry 40ft high cube measures 12,032 × 2,350 × 2,700 mm. This container holds 24 × 5 × 9 = 1,080 cartons. However, the reefer carries 160 fewer cartons. Note that 920 is a zero-clearance geometric maximum. This leaves only 25 mm at the top. A reefer may also have a lower maximum loading height than its internal reefer container dimensions. You can test other orientations with how many cartons fit in a container.
Worked example 2: pallets in a 40ft reefer
Say you ship EUR pallets (1,200 × 800 mm) in the same Hapag-Lloyd reefer.

- Pallets lengthwise (1,200 mm along the box): 11,599 ÷ 1,200 = 9.67 → 9 per row; width 2,290 ÷ 800 = 2.86 → 2 rows; 9 × 2 = 18 pallets
- Pallets turned (800 mm along the box): 11,599 ÷ 800 = 14.5 → 14; width 2,290 ÷ 1,200 = 1.9 → 1 row; 14 pallets
- This mixed arrangement uses one column turned (800 mm along the box, 1,200 mm across). It sits beside one lengthwise column (800 mm across). So, it uses 1,200 + 800 = 2,000 mm of the 2,290 mm width. As a result, 14 + 9 = 23 pallets fit.
For US GMA pallets (48 × 40 in, 1,219 × 1,016 mm): two columns with 48 in along the box give 11,599 ÷ 1,219 = 9.5 → 9 per column, 9 × 2 = 18. Mixing one column each way uses 1,016 + 1,219 = 2,235 mm of width: 11,599 ÷ 1,016 = 11.4 → 11, plus 9, so 20 pallets.
These are zero-clearance, single-tier counts and do not test pinwheel layouts. In a dry 40ft, iContainers gives 24–25 EUR pallets on the floor, so the reefer loses 1–2 EUR pallet positions. See how many pallets fit in a container for dry-container figures.
Planning tips for reefer loads
- Use the inside dimensions of the actual reefer you are booking. For example, inside length varies from 11,580 to 11,599 mm. Height varies from 2,415 to 2,557 mm, even among four lines.
- Ask your carrier for the maximum loading height. Also ask about any required airflow space. Then, plan to that figure instead of the full internal height.
- Check the payload, not just the volume. Dense frozen cargo can reach the weight limit before the space runs out.
- Remember that your declared gross mass includes the reefer’s tare. This tare is higher than a dry box’s. See verified gross mass for more information.
- Allow for less usable space than the published volume; broken stowage explains why.
- You can keep a one-page reference of key numbers. Also, the freight cheat sheet has dry container and pallet figures.
FAQ
What are the inside dimensions of a 40ft reefer?
The length is about 11,580–11,599 mm. Its width is 2,275–2,294 mm. The height is 2,415–2,557 mm, depending on the carrier. For example, Hapag-Lloyd lists 11,599 × 2,290 × 2,425 mm.
How many cubic meters is a 40ft reefer?
Published nominal volumes are about 67.5–68 m³. CMA CGM also lists an “in use” figure of 64.9 m³.
What is the payload of a 40ft reefer?
Hapag-Lloyd, Maersk, and CMA CGM report about 29,300–29,580 kg. However, the maximum gross is 34,000 kg.
How big is a 20ft reefer inside?
About 5,450–5,456 mm long, 2,280–2,294 mm wide and 2,159–2,273 mm high, with 27–28.6 m³ of nominal volume.
Why is a reefer smaller inside than a dry container?
Insulation and refrigeration machinery take up space. So, a 40ft reefer is about 11.58–11.60 m long inside. A dry 40ft container is about 12.03 m long.
Related guides
- How Many CBM in a 40ft Container? 40ft and High Cube Capacity
- 45ft High Cube Container: Dimensions, Capacity and Uses
- How Many CBM in a 20ft Container? Inside vs Usable Volume
- How to Plan a Container Load: Weight Distribution, Stacking and Dunnage
Sources and further reading
- Hapag-Lloyd: 40′ Reefer High Cube: reefer inside dimensions and payload.
- CMA CGM: Container Types and Sizes: dimensions and payloads for every box type.
- Ocean Network Express: Dry Containers: dimensions, tare and payload.
