Sea Freight & Containers

45ft High Cube Container: Dimensions, Capacity and Uses

45ft High Cube Container: Dimensions, Capacity and Uses

A 45ft high cube container measures about 13,556 × 2,352 × 2,700 mm inside. This is 44 ft 5.7 in × 7 ft 8.6 in × 8 ft 10.3 in. It holds about 86 m³ (3,037 ft³) of cargo space. Most lines list a payload of roughly 27.6–27.9 t. For example, CMA CGM lists 25,780 kg on a 30,480 kg gross rating. Compared with a 40ft high cube, you gain about 9.7 m³ of space. However, you do not gain more payload. Use the calculator below to test your own cartons in a 45ft box.

Container loading calculator (cartons per container)

Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →

45ft container dimensions by carrier

Published figures differ slightly between lines. So, treat them as typical. Also, check the equipment line on your booking. All values are in mm and kg.

45ft container dimensions: A large container ship loaded with stacked shipping containers on water
CarrierInside L × W × H (mm)Door W × H (mm)Volume (m³)Tare (kg)Payload (kg)
Hapag-Lloyd13,556 × 2,352 × 2,7002,340 × 2,59786.04,80027,700
Maersk13,556 × 2,352 × 2,6982,340 × 2,585854,90027,600
CMA CGM13,556 × 2,352 × 2,7002,340 × 2,58586.04,70025,780
ONE13,556 × 2,352 × 2,6972,340 × 2,58586.04,65027,850

The maximum gross weight (tare plus cargo) is 32,500 kg for Hapag-Lloyd, Maersk, and ONE. However, CMA CGM’s listing shows 30,480 kg. So, the CMA CGM payload is about 2 t lower. The door opening is 2,340 mm (92.1 in) wide. Its height is 2,585–2,597 mm (101.8–102.2 in). Therefore, anything taller than the door cannot go in. This is true even though the inside height is 2,700 mm.

For the other box types, see the full guide to shipping container dimensions.

45ft vs 40ft high cube

The 45ft high cube has the same width and height as a 40ft high cube. However, its difference is length: 13,556 − 12,032 = 1,524 mm, which is exactly 60 in (5 ft). Using Hapag-Lloyd’s figures:

Stacked blue shipping containers against a blue sky
Item40ft HC45ft HCDifference
Inside length (mm)12,03213,556+1,524
Volume (m³)76.386.0+9.7
Tare (kg)3,9004,800+900
Max gross (kg)32,50032,5000
Max payload (kg)28,60027,700−900
Typical real load (m³, forwarder rule of thumb)65–6873–78about +8 to +10

Extra space provides 12.7% more volume. This is 9.7 ÷ 76.3. The maximum gross weight stays at 32,500 kg. Also, the longer box is 900 kg heavier. Its payload falls by the same 900 kg. The 45ft container dimensions make it ideal for light, bulky goods, not heavy ones. Find more detail on 40ft options. See how many CBM fit in a 40ft container.

The “typical real load” row comes from Mighty Shipping. This is a forwarder’s rule of thumb. It is not from a container line. You rarely load the full 86 m³. This is because of gaps between cartons and walls. You also need ceiling clearance and dunnage. Broken stowage explains where that space goes.

How to work out what fits in a 45ft container

The carton count follows the same method as any container:

  1. Cartons per layer = floor(inside length ÷ carton length) × floor(inside width ÷ carton width)
  2. Layers = floor(inside height ÷ carton height)
  3. Total = cartons per layer × layers. Also, try each orientation the carton allows.
  4. Check weight: total cartons × carton weight ≤ payload

“Floor” means you round down to a whole carton. Also, the carton-per-container guide covers orientations in more depth.

Example 1: light cartons (volume decides)

Say you ship cartons. They measure 50 × 40 × 40 cm (19.7 × 15.7 × 15.7 in). Each carton weighs 14 kg. You stand them with a 40 cm side along the length. Another 40 cm side goes across. The 50 cm side is upright.

  • Length: 13,556 ÷ 400 = 33.9 → 33
  • Width: 2,352 ÷ 400 = 5.88 → 5
  • Height: 2,700 ÷ 500 = 5.4 → 5
  • Total: 33 × 5 × 5 = 825 cartons

Allow 30 mm for wall corrugations and 50 mm for ceiling clearance and the count holds: 2,322 ÷ 400 = 5.8 → 5 and 2,650 ÷ 500 = 5.3 → 5, so still 825. Volume loaded: 0.5 × 0.4 × 0.4 = 0.08 m³ per carton, × 825 = 66.0 m³. Weight: 825 × 14 = 11,550 kg, far below the payload.

In a 40ft high cube the same layout gives 12,032 ÷ 400 = 30.08 → 30, so 30 × 5 × 5 = 750 cartons. The 45ft carries 75 more cartons (10% more) in one box.

Example 2: heavy cartons (payload decides)

Now the same carton weighs 36 kg. A full 45ft load would be 825 × 36 = 29,700 kg. This is above the 27,700 kg payload. Therefore, the weight limit allows 27,700 ÷ 36 = 769.4 cartons. This means you can ship 769 cartons (769 × 36 = 27,684 kg). For a gross check, 27,684 + 4,800 tare equals 32,484 kg. This is just under 32,500 kg.

A 40ft high cube takes 750 cartons × 36 kg = 27,000 kg, within its 28,600 kg payload. So the 45ft gains only 769 − 750 = 19 cartons here. Whether those 19 cartons justify a 45ft depends on your quotes.

First, do a quick density test. Divide 27,700 kg by 86.0 m³. This equals 322 kg/m³. If your cargo is denser than about 322 kg/m³, a full 45ft will reach its payload limit. Hapag-Lloyd figures show this. For the 40ft high cube, the figure is 28,600 ÷ 76.3. This equals 375 kg/m³. You can check limits per carrier in container weight limits.

Pallets in a 45ft high cube

These single-tier counts use the 13,556 × 2,352 mm floor. They try uniform rows in both orientations. The first number assumes zero clearance. The second number assumes 50 mm total clearance on length and width.

Vast stack of colorful shipping containers in a container port terminal
Pallet40ft / 40ft HC45ft HC
EUR 1 (1,200 × 800 mm)25 / 2327 / 27
EUR 2 (1,200 × 1,000 mm)22 / 2024 / 24
US GMA 48 × 40 in (1,219 × 1,016 mm)20 / 2024 / 24
Square 1,100 × 1,100 mm20 / 2024 / 24
Australian 1,165 × 1,165 mm20 / 1022 / 11

You can load one column of Euro pallets crosswise. This means 800 mm along the length. So, 13,556 ÷ 800 = 16.9, or 16 pallets. A second column runs lengthwise. This means 1,200 mm along the length. Thus, 13,556 ÷ 1,200 = 11.3, or 11 pallets. In total, this uses 1,200 + 800 = 2,000 mm of the 2,352 mm width. Therefore, 16 + 11 = 27 pallets fit. You can find the full method in how many pallets fit in a container.

Road and terminal points to check

A 45ft box is longer than the 40ft units most chassis and trailers are built around, so check the road leg before you book:

Large container cranes and a ship at a port terminal
  • United States: The FHWA states there is no federal length limit. This applies to most tractor-semitrailers. However, states may not restrict semitrailers below 48 ft. So, the exact rules for your route are state rules.
  • European Union: Directive 96/53/EC sets a maximum length of 16.5 m for an articulated vehicle. This is according to the European Parliament’s research service. However, whether a given tractor and 45ft chassis combination stays within that depends on the equipment.
  • Availability: Ask your forwarder if your lane offers 45ft equipment. Also, ask if the delivery haulier can move it.

Tips and common mistakes

  • Assuming more length means more weight. The payload is usually lower than a 40ft high cube’s.
  • You can use the 2,700 mm inside height for a single item. However, tall machinery must pass through the 2,585–2,597 mm door.
  • Load to 86 m³ on paper. But plan with a carton-level packing list. Do not use only a total volume.
  • Ignoring the VGM. The gross mass you declare under SOLAS includes the 4,650–4,900 kg tare; see verified gross mass.

FAQ

What are the inside dimensions of a 45ft high cube container?

About 13,556 mm long, 2,352 mm wide and 2,697–2,700 mm high, depending on the carrier. That is roughly 44 ft 5.7 in × 7 ft 8.6 in × 8 ft 10.3 in.

How many cubic meters is a 45ft container?

Hapag-Lloyd, CMA CGM, and ONE list 86.0 m³. Maersk lists 85 m³. However, a forwarder rule of thumb puts a typical real load at 73–78 m³.

What is the maximum payload of a 45ft high cube?

It ranges from 25,780 kg (CMA CGM, 30,480 kg gross) to 27,850 kg (ONE). For example, Hapag-Lloyd lists 27,700 kg and Maersk 27,600 kg.

Is a 45ft container better than a 40ft high cube?

Only for light, bulky cargo. It adds about 9.7 m³ of space, but its payload is about 900 kg lower than Hapag-Lloyd’s 40ft high cube.

How many Euro pallets fit in a 45ft container?

Up to 27 single-stacked, computed as 16 crosswise plus 11 lengthwise. Double stacking can increase that if load height and weight allow.

Sources and further reading

Calculate your whole shipment

Enter every carton size once: get CBM, cubic feet, air and sea chargeable weight, freight class and the container that fits.

Open Calculator

Latest in Sea Freight & Containers

Sea Freight & Containers →

Leave a Reply

Your email address will not be published. Required fields are marked *