LCL becomes more expensive than FCL at a certain point. This happens when your revenue tons, multiplied by the LCL rate, plus any per-shipment fees, exceed the all-in price of a container. For example, consider rates of 65 per RT plus 280 in fixed fees. A 20ft container costs 1,750. The break-even is about 22.6 revenue tons. The exact point depends entirely on your quotes. Therefore, use the calculator below. Check which container your cargo needs. Then, run the comparison with real rates.
Which container do I need?
Runs in your browser; nothing you enter is sent anywhere. Carrier figures differ, so confirm the final numbers with your forwarder. Whole shipment: all-in-one freight calculator →
What LCL and FCL mean
LCL (less than container load) means your cargo shares a container with other shippers. A container freight station (CFS) receives, consolidates, ships, and unloads it at the destination CFS. You pay per revenue ton (RT), using the W/M rule: the greater of cubic meters or metric tonnes, with 1 m³ treated as 1,000 kg. The full method is in how LCL sea freight is calculated.

FCL (full container load) means you book a whole container. You pay per box, regardless of how full it is. DHL Global Forwarding describes FCL as charged per container rather than by weight or volume.
The break-even formula
LCL cost = (RT × LCL rate per RT) + LCL per-shipment fees

FCL cost = all-in price of the container (freight plus local charges)
Break-even RT = (FCL cost − LCL per-shipment fees) ÷ LCL rate per RT
Above the break-even, FCL is cheaper. Below it, LCL is cheaper. Make sure both sides cover the same scope: origin charges, ocean freight, destination charges and delivery. Comparing an LCL door-to-door price with an FCL port-to-port price gives a wrong answer. The freight quote guide shows how to line quotes up.
Worked example 1: volume-driven cargo
Example rates (replace with your own quotes):

- LCL: 65 per RT, plus 280 in per-shipment fees
- FCL 20ft: 1,750 all-in
Break-even: (1,750 − 280) ÷ 65 = 1,470 ÷ 65 = 22.6 RT
Shipment A: 14 m³, 3,000 kg
- RT: 14 > 3, so 14 RT
- LCL: 14 × 65 + 280 = 910 + 280 = 1,190
- FCL: 1,750
- LCL is cheaper by 1,750 − 1,190 = 560
Shipment B: 24 m³, 5,000 kg
- RT: 24 > 5, so 24 RT
- LCL: 24 × 65 + 280 = 1,560 + 280 = 1,840
- FCL: 1,750
- FCL is cheaper by 1,840 − 1,750 = 90
24 m³ also fits within the 25–28 m³. A forwarder’s rule of thumb gives this as a typical real load for a 20ft. Check that with how many CBM fit in a 20ft container.
The cost curve in a table
Using the same example rates, here is how the two options compare as the shipment grows:
| Revenue tons | LCL cost | FCL 20ft cost | Cheaper option |
|---|---|---|---|
| 5 | 605 | 1,750 | LCL |
| 10 | 930 | 1,750 | LCL |
| 15 | 1,255 | 1,750 | LCL |
| 20 | 1,580 | 1,750 | LCL |
| 25 | 1,905 | 1,750 | FCL |
Each row is RT × 65 + 280. The lines cross between 20 and 25 RT. As a result, the break-even is 22.6 RT.
Worked example 2: dense cargo reaches break-even early
Example rates (different lane, replace with your own):

- LCL: 90 per RT, plus 350 in per-shipment fees
- FCL 20ft: 1,500 all-in
Break-even: (1,500 − 350) ÷ 90 = 1,150 ÷ 90 = 12.8 RT
Shipment C: 9 m³ of stone samples, 15,000 kg
- Weight in tonnes: 15,000 ÷ 1,000 = 15 t
- RT: 15 > 9, so 15 RT
- LCL: 15 × 90 + 350 = 1,350 + 350 = 1,700
- FCL: 1,500
- FCL is cheaper by 200, even though the cargo fills only 9 m³
LCL bills heavy cargo by weight. However, FCL charges a flat price. This applies as long as your cargo stays within the container’s payload. For example, a 20ft Hapag-Lloyd container has a payload of about 28 tons. Therefore, no single break-even volume holds for every shipment. Any quoted figure for “the” break-even is just a rule of thumb. It applies to one specific set of rates.
Beyond price: other differences
Price is not the only factor. These differences follow from how each service works:

- Handling: LCL cargo is loaded and unloaded at both CFS warehouses alongside other shippers’ goods. Your supplier usually loads FCL cargo, and you open it at your premises.
- Timing: LCL depends on the consolidator’s schedule at both ends, so ask for cut-off and availability dates. FCL can move as soon as you load and clear the container.
- Holds: In LCL, one container holds goods from several shippers. So, ask your forwarder about customs inspections. Someone else’s cargo inspection could affect yours.
- Free time: In FCL, you must return the container on time. Otherwise, demurrage and detention charges can apply.
- Packing: You should palletize or pack LCL cargo to withstand extra handling. Also, review cargo insurance for either mode.
A practical decision process
- Calculate total CBM and weight from the packing list.
- Work out revenue tons (the greater of m³ or tonnes).
- Get an LCL quote. Also, get a 20ft FCL quote. Both should cover the same scope.
- Compute the break-even RT with the formula above.
- If you are near the break-even, look at handling and timing. Also, consider the cost of holding stock.
- If you choose FCL, confirm the cargo actually fits; theoretical volume is not usable volume, as explained in broken stowage.
Amazon sellers face extra questions about receiving appointments and pallet labeling; see LCL or FCL for Amazon FBA.

FAQ
At what CBM does FCL become cheaper than LCL?
Your rates determine the answer. First, divide the FCL all-in price. Then subtract any LCL per-shipment fees. Next, divide this by the LCL rate per RT. For example, if rates are 1,750, 280, and 65, the break-even is about 22.6 RT.
Does a heavy shipment change the break-even?
Yes. LCL charges by weight. This applies when your cargo is denser than 1,000 kg/m³. Therefore, a small but heavy shipment can reach the break-even. This happens at a much lower volume.
Can I book a 20ft container if my cargo is only half full?
Yes. You pay the full container price regardless of the load. So, this only makes sense if that price is lower than the LCL total. Alternatively, it makes sense if you value the reduced handling.
Is LCL slower than FCL?
It can be, because cargo waits for consolidation and deconsolidation at the CFS. Ask your forwarder for the actual cut-off and availability dates on your lane.
Should I include local charges when comparing?
Yes. Compare like with like: origin charges, ocean freight, destination charges and delivery on both quotes.
Related guides
- 20ft vs 40ft Container: Which Is Better for Your Shipment?
- Shipping Container Dimensions: 20ft, 40ft, 40ft High Cube and 45ft
- Open Top and Flat Rack Containers: Sizes and When to Use Them
- How Many Pallets Fit in a 20ft and 40ft Container?
Sources and further reading
- iContainers: How Ocean Freight Charges Are Calculated: the W/M rule and minimums.
- SEKO Logistics: LCL Shipping: 1 CBM = 1,000 kg revenue ton.
- iContainers: 40-Foot Container Guide discusses pallet counts. Also, it explains why total CBM is not enough.
